Filters
Close

Arduino UNO with pack of( LCD ,Usb cable,keypad,20 female to female connector)


SKU: 81037
Vendor: HobbyAndYou
₹ 1,499.00
650.00

The Arduino Uno is a microcontroller board based on the ATmega328 ."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. It has 14 digital input/output pins , 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. This is your first step towards interfacing the lcd and keypad with your arduino

  • Orignal and Brand new product
  • Especially designed for Arduino beginners
  • Skill Level: Beginners to Advance level
  • In the Box:- 1 X Arduino UNO, 1 X LCD ,1 X Usb cable, 1 X keypad, 20 X female to female connector Jumper wire

             LCD TERMINALS:

  • Terminal 1

    GND

    Terminal 2

    +5V

    Terminal 3

    Mid terminal of potentiometer (for brightness control)

    Terminal 4

    Register Select (RS)

    Terminal 5

    Read/Write (RW)

    Terminal 6

    Enable (EN)

    Terminal 7

    DB0

    Terminal 8

    DB1

    Terminal 9

    DB2

    Terminal 10

    DB3

    Terminal 11

    DB4

    Terminal 12

    DB5

    Terminal 13

    DB6

    Terminal 14

    DB7

    Terminal 15

    +4.2-5V

    Terminal 16

    GND

The Arduino Uno is a microcontroller board based on the ATmega328 ."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. It has 14 digital input/output pins , 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2Atmega8U2 up to version R2) programmed as a USB-to-serial converter. This is your first step towards interfacing the lcd and keypad with your arduino

  • Orignal and Brand new product
  • Especially designed for Arduino beginners
  • Skill Level: Beginners to Advance level
  • In the Box:- 1 X Arduino UNO, 1 X LCD ,1 X Usb cable, 1 X keypad, 20 X female to female connector Jumper wire

             LCD TERMINALS:

  • Terminal 1

    GND

    Terminal 2

    +5V

    Terminal 3

    Mid terminal of potentiometer (for brightness control)

    Terminal 4

    Register Select (RS)

    Terminal 5

    Read/Write (RW)

    Terminal 6

    Enable (EN)

    Terminal 7

    DB0

    Terminal 8

    DB1

    Terminal 9

    DB2

    Terminal 10

    DB3

    Terminal 11

    DB4

    Terminal 12

    DB5

    Terminal 13

    DB6

    Terminal 14

    DB7

    Terminal 15

    +4.2-5V

    Terminal 16

    GND